Your hot water heater is a workhorse. Day or evening, it's producing perfectly heated water whenever you desire it.
So when it all of a sudden goes on the fritz, most of us have the tendency to overreact.
Luckily a non-functioning water heater doesn't always suggest a pricey repair.
Before making an emergency call to your plumbing technician, we recommend you take a deep breath, roll up your sleeves and inspect out the problem for yourself.
Repairing Tip # 1 Check your pilot light.
If you have a gas water heater, remove the small panel at the bottom of the appliance and check to see if the aviator light is lit.
Spark it with a match or lighter to re-ignite it. If it stays lit, your water heater should kick-in and start working appropriately.
If the pilot burner on your water heater doesn't remain lit, you might should replace the thermocouple or have the burner cleaned.
Troubleshooting Tip # 2 Replace the thermocouple. (It seems like part of the International Space Station, however it's actually a basic system that you can change on your water heater.).
Consult your owner's handbook. It needs to have easy-to-follow guidelines for ways to remove and replace the thermocouple.
Turn off the gas prior to you do get rid of anything from your water heater.
Following the directions in your individual's manual, get rid of the thermocouple by removing it from both sides of the pilot line.
Replace the thermocouple on your water heater with a brand-new one that is cut to length.
Turn on the gas and check for leaks, then re-light your pilot light.
Fixing Tip # 3 Hit the reset button.
If you have an electric water heater, locate the reset button and press it until you hear a click.
If you do not hear a click, or it fails to restart the water heater, reset the breaker.
If a breaker reset doesn't do the technique, you might have to change the thermostat.
Fixing Tip # 4 Replace the thermostat.
Shut off the power to the water heater, and turn off the breaker it is linked to. You do not want to electrocute yourself!
Use the owner's manual to find the thermostat wires, then separate them.
Get rid of the thermostat and have it checked by an appliance dealership. If it is damaged, change it.
Repairing Tip # 5 Replace the heating element.
With the power still switched over off, get rid of the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires away from the heating element.
Eliminate each part of the aspect and have them tested by an appliance dealership. If they are defective, replace them.
Your water heater need to be working in no time. If these steps fall short to fix your hot water heater, or if you don't feel comfy doing them by yourself, call us.
For more water heater tips, check out this link.
So when it all of a sudden goes on the fritz, most of us have the tendency to overreact.
Luckily a non-functioning water heater doesn't always suggest a pricey repair.
Before making an emergency call to your plumbing technician, we recommend you take a deep breath, roll up your sleeves and inspect out the problem for yourself.
Repairing Tip # 1 Check your pilot light.
If you have a gas water heater, remove the small panel at the bottom of the appliance and check to see if the aviator light is lit.
Spark it with a match or lighter to re-ignite it. If it stays lit, your water heater should kick-in and start working appropriately.
If the pilot burner on your water heater doesn't remain lit, you might should replace the thermocouple or have the burner cleaned.
Troubleshooting Tip # 2 Replace the thermocouple. (It seems like part of the International Space Station, however it's actually a basic system that you can change on your water heater.).
Consult your owner's handbook. It needs to have easy-to-follow guidelines for ways to remove and replace the thermocouple.
Turn off the gas prior to you do get rid of anything from your water heater.
Following the directions in your individual's manual, get rid of the thermocouple by removing it from both sides of the pilot line.
Replace the thermocouple on your water heater with a brand-new one that is cut to length.
Turn on the gas and check for leaks, then re-light your pilot light.
Fixing Tip # 3 Hit the reset button.
If you have an electric water heater, locate the reset button and press it until you hear a click.
If you do not hear a click, or it fails to restart the water heater, reset the breaker.
If a breaker reset doesn't do the technique, you might have to change the thermostat.
Fixing Tip # 4 Replace the thermostat.
Shut off the power to the water heater, and turn off the breaker it is linked to. You do not want to electrocute yourself!
Use the owner's manual to find the thermostat wires, then separate them.
Get rid of the thermostat and have it checked by an appliance dealership. If it is damaged, change it.
Repairing Tip # 5 Replace the heating element.
With the power still switched over off, get rid of the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires away from the heating element.
Eliminate each part of the aspect and have them tested by an appliance dealership. If they are defective, replace them.
Your water heater need to be working in no time. If these steps fall short to fix your hot water heater, or if you don't feel comfy doing them by yourself, call us.
For more water heater tips, check out this link.